Switch Management Commands 1886ExampleThis example shows the truncated output for the configuration of interfaceGi1/0/1. Since the all parameter is given, both the non-default and thedefault values are shown.console#show running-config interface gi1/0/1 allspeed autostorm-control broadcast level 5storm-control broadcast level 5no storm-control broadcaststorm-control multicast level 5storm-control multicast level 5no storm-control multicaststorm-control unicast level 5no storm-control unicastlacp port-priority 1lacp timeout longno classofservice trustcos-queue min-bandwidth 0 0 0 0 0 0 0traffic-shape 0 Kbpsno switchport voice detect autono ip dhcp snooping trustno ip dhcp snooping log-invalidno dhcp l2relayno dhcp l2relay trustno ip dhcp snooping limitno ipv6 dhcp snooping trustno ipv6 dhcp snooping log-invalidno ipv6 dhcp snooping limitno ip verify sourceno ipv6 verify sourceno ip arp inspection trustno ip arp inspection limitshow startup-configUse the show startup-config command to display the startup configurationfile contents.Syntaxshow startup-config
