Dell EMC Networking CLI 210System Managementlogging traps Sets the lowest severity level at which SNMPtraps are logged.GClogging web-session Enables web session logging. GCport Specifies the port number on which theSYSLOG server listens for messages.Lshow logging Displays the state of logging and the messagesstored in the internal buffer.PEshow logging file Displays the state of logging and the messagesstored in the logging file.PEshow syslog-servers Displays the SYSLOG server settings. PEterminal monitor Enables the display of logging messages over atelnet of SSH session.PEa. For the meaning of each Mode abbreviation, see Mode Types .Command Description Modeaasset-tag Specifies the switch asset-tag. GCbanner exec Sets the message that is displayed after asuccessful login.GCbanner login Sets the message that is displayed just beforethe login prompt.GCbanner motd Specifies message-of-the-day banner. GCbanner motdacknowledgeAcknowledges message-of-the-day banner. GCbuffers Configures the rising and falling thresholds forthe issuance of the message buffer SNMP trapand notification via a SYSLOG message.GCclear checkpointstatisticsClears the statistics for the checkpointingprocess.GCclear counters stack-portsClears the statistics for all stack-ports. PECommand Description Mode a
