Switch Management Commands 2050User GuidelinesDebug output should be enabled with caution. Switch behavior may beadversely affected by the additional processing load incurred from enablingdebug.Exampleconsole#debug ipv6 pimsm packetdebug isdpUse the debug isdp command to trace ISDP packet reception andtransmission. The receive option traces only received ISDP packets and thetransmit option traces only transmitted ISDP packets. When neither keywordis used in the command, then all ISDP packet traces are dumped. Vitalinformation such as source address, destination address, control packet type,packet length, and the interface on which the packet is received ortransmitted is displayed on the console. Use the “no” form of this commandto disable ISDP tracing.Syntaxdebug isdp packet [receive | transmit]no debug isdp packet [receive | transmit]Default ConfigurationDisplay of ISDP traces is disabled by default.Command ModePrivileged Exec mode.User GuidelinesDebug output should be enabled with caution. Switch behavior may beadversely affected by the additional processing load incurred from enablingdebug.Exampleconsole#debug isdp packet
