Layer 3 Routing Commands 1710Command ModeUser Exec mode, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesOSPF must be enabled for this command to display the virtual interfaceinformation.ExampleThe following example displays the OSPF Virtual Interface information inthe system.console#show ipv6 ospf virtual-link briefHello Dead Retransmit TransitArea ID Neighbor Interval Interval Interval Delay------- -------- -------- -------- ---------- -------0.0.0.2 5.5.5.5 10 40 5 1timers pacing floodUse the timers pacing flood command to adjust the rate at which OSPFv2sends LS Update packets.Use the no form of the command to return the timer pacing to the defaultvalue.Syntaxtimers pacing flood millisecondsno timers pacing flood• milliseconds—The average time between transmission of LS Updatepackets. The range is from 5 ms to 100 ms. The default is 33 ms.Default ConfigurationThe default pacing between LS Update packets is 33 ms.Command ModeOSPFv2 Global Configuration mode
