Layer 3 Routing Commands 1345Exampleconsole# show ip bgpBGP table version is 5, local router ID is 20.1.1.1Status codes: s suppressed, * valid, > best, i - internalOrigin codes: i - IGP, e - EGP, ? - incompleteNetwork Next Hop Metric LocPrf Path Origin*> 172.20.1.0/24 100.10.1.1 10 100 20 10 i200.10.1.1*> 172.20.2.0/24 100.10.1.1 10 100 20 10 ?show ip bgp aggregate-addressUse the show ip bgp aggregate-address command to list the aggregateaddresses that have been configured and indicates whether each is currentlyactive.Syntaxshow ip bgp [vrf vrf-name] aggregate-address• vrf vrf-name — Displays the aggregate address information associatedwith the named VRF.Default ConfigurationBy default, information about the global VRF is shown.Command ModePrivileged Exec mode, Global Configuration mode, and all sub-modes.User GuidelinesIf the vrf argument is specified, information pertaining to that VRF isdisplayed.The following fields are displayed.Field DescriptionPrefix/Len Destination prefix and length
