Switch Management Commands 2192Messages Checkpointed.....................6708Bytes Checkpointed........................894305Time Since Counters Cleared...............3d 01:05:09Checkpoint Message Rate...................0.025 msg/secLast 10-second Message Rate...............0 msg/secHighest 10-second Message Rate............8 msg/secshow cut-through modeUse the show cut-through mode command to show the cut-through mode onthe switch.Syntaxshow cut-through modeCommand ModePrivileged Exec, Global Configuration mode and all Configuration submodesDefault ConfigurationThis command has no default configuration.User GuidelinesThis command is not available on N1100-ON/N1500/N2000/N2100-ON/N3000/N3100-ON switches.ExampleConsole#show cut-through modeCurrent mode : EnableConfigured mode : Disable (This mode is effective on next reload)show hardware profileUse the show hardware profile command to display the hardware profileinformation for the 40G ports. The user can optionally specify an interface orall 40G interfaces are displayed.
