Switch Management Commands 2105link Enable/Disable switch level Link Up/Down trap flag.multiple-users Configure multiple users login traps.ospf Enable/Disable OSPF Traps.ospfv3 Enable/Disable OSPFv3 Traps.pim Enable/Disable traps for protocol-independentmulticast.port-security Enable/Disable switch level Maclock Violation trapflag.snmp Enable SNMP traps.spanning-tree Configure spanning tree traps.vrf Specify VPN Routing/Forwarding instance.vrrp Enable/Disable VRRP trap.snmp-server engineID localUse the snmpserver engineID local command in Global Configuration modeto specify the Simple Network Management Protocol (SNMP) engine ID onthe local device.To remove the configured engine ID, use the no form of this command.Syntaxsnmp-server engineID local {engineid-string | default}no snmp-server engineID local• engineid-string — The character string that identifies the engine ID.The engine ID is a concatenated hexadecimal string. Each byte inhexadecimal character strings is two hexadecimal digits. Each byte canbe separated by a period or colon. (Range: 6-32 characters)• default — The engineID is created automatically, based on the deviceMAC address.Default ConfigurationThe engineID is generated using the switch MAC address.Command ModeGlobal Configuration mode
