Layer 2 Switching Commands 436• Operational Status—The MEP operational status• MAC—The MAC address associated with the MEP.Exampleshow ethernet cfm maintenance-points local level 1---- ----- ---- ---- ------ ----- -------- ------ ----------- -----MPID Level Type VLAN Port Dire- CC MEP- Operational MACction Transmit Active Status---- ----- ---- ---- ------ ----- -------- ------ ----------- -----1 1 MEP 10 Gi1/0/1 UP Enabled True 00:02:bc:02:02:02----- ---- ------ -----------------Level Type Port MAC----- ---- ------ -----------------show ethernet cfm maintenance-points remoteUse the show ethernet cfm maintenance-points remote command to displaythe configured remote maintenance points.Syntaxshow ethernet cfm maintenance-points remote {level 0-7 | domain domain-name | detail [mac mac-address | mep mpid] [domain domain-name | level0-7] [vlan vlan-id]}• domain—Name of the maintenance domain (an alphanumeric string ofup to 43 characters in length).• level—Maintenance association level• mac-addr—The destination MAC address for which the connectivity needs tobe verified. Either MEP ID or the MAC address option can be used.• vlan-id— A VLAN associated with the maintenance domain. Range: 1-4093.• mpid— The MEP ID from which the loopback message needs to be transmitted.Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec, Global Configuration mode and all Configuration submodes
