Switch Management Commands 2169It is not possible to disconnect the EIA-232 (serial console) session.exitUse this command to disconnect the serial connection to a remote unit.SyntaxexitDefault ConfigurationThere is no default configuration for this command.Command ModesUser Exec mode on stack master.Unit prompt on the stack member.User GuidelinesThis command is available in User Exec mode on the master unit serial portand from the Unit prompt on member unit serial ports. The user need not becurrently connected over the serial port to connect to another unit.The stack member being connected to must be up and running andconnected as part of the stack.ExampleExample 1:To disconnect a remote session to a stack member established from the stackmanager.Stack-Master#connect 2Remote session started. Type “exit” to exit the session.(Unit 2 - CLI unavailable - please connect to master on Unit 1)>exitStack-Master#Example 2:
