Switch Management Commands 2136Syntaxlevel <level>no level• level—The severity level for syslog messages. (Range: emergency, alert,critical, error, warning, notice, info, debug)Default ConfigurationThe default value for level is info.Command ModeLogging modeUser GuidelinesAfter entering the view corresponding to a specific SYSLOG server, thecommand can be executed to set the severity level for SYSLOG messages.Debug level messages are intended for use by support personnel. The outputis voluminous, cryptic, and because of the large number of messagesgenerated, can adversely affect switch operations. Only set the logging level todebug under the direction of support personnel.ExampleThe following example sets the SYSLOG message severity level to alert.console(config-logging)#level alertlogging cli-commandUse the logging cli-command in Global Configuration mode to enable CLIcommand logging.Syntaxlogging cli-commandno logging cli-commandDefault ConfigurationDisabled
