Security Commands 932console(config)#interface vlan 1console(config-if-vlan1)#ip address dhcpconsole(config-if-vlan1)#exitconsole(config)#radius-server source-interface vlan 1radius-server timeoutUse the radius-server timeout command in Global Configuration mode to setthe interval for which a switch waits for a server to reply. To restore thedefault, use the no form of this command.Syntaxradius-server timeout timeoutno radius-server timeout• timeout — Specifies the timeout value in seconds. (Range: 1–30)Default ConfigurationThe default value is 15 seconds.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelines.ExampleThe following example sets the interval for which a switch waits for a server toreply to 5 seconds.console(config)#radius-server timeout 5retransmitUse the retransmit command in RADIUS Server Configuration mode tospecify the number of times the RADIUS client retransmits requests to theRADIUS server.
