Layer 2 Switching Commands 716Syntaxshow diffservDefault ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays the DiffServ information.console#show diffservDiffServ Admin mode.......................... EnableClass Table Size Current/Max................. 5 / 25Class Rule Table Size Current/Max............ 6 / 150Policy Table Size Current/Max................ 2 / 64Policy Instance Table Size Current/Max....... 2 / 640Policy Attribute Table Size Current/Max...... 2 / 1920Service Table Size Current/Max............... 26 / 214show diffserv service interfaceUse this command to display policy service information for the specifiedinterface.NOTE: This command is not available on the N1500 Series switches.Syntaxshow diffserv service interface {interface-id} {in|out}• interface-id—An Ethernet or port-channel identifier.• in—Show ingress policies.• out—Show egress policies.
