Layer 2 Switching Commands 307ExampleIn this example, all static entries in the bridge-forwarding database aredisplayed.console#show mac address-table staticVlan Mac Address Type Port---- -------------- ----- -----1 0001.0001.0001 Static Gi1/0/1show mac address-table vlanUse the show mac address-table vlan command in User Exec or PrivilegedExec mode to display all entries in the bridge-forwarding database for thespecified VLAN.Syntaxshow mac address-table [vlan vlan-id]• vlan-id —Specify a valid VLAN; the range is 1 to 4093.Default ConfigurationThis command has no default configuration.Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.ExampleIn this example, multiple classes of entries in the bridge forwarding databaseare displayed.console(config-if-Gi1/0/4)#show mac address-table vlan 1Aging time is 400 SecVlan Mac Address Type Port-------- --------------------- ----------- ---------------------1 1418.7715.1BAA Dynamic Gi2/0/29
