Layer 3 Routing Commands 1603User GuidelinesThere are no user guidelines for this command.Exampleconsole(config)#ipv6 pim bsr-candidate vlan 9 10 34ipv6 pim dense-modeUse the ipv6 pim dense-mode command in Global configuration mode toadministratively configure PIM dense mode for IPv6 multicast routing. Thiscommand also enables MLD. Use the no form of this command to disablePIM and MLD. This command does not affect ip multicast-routing.Syntaxipv6 pim dense-modeno ipv6 pimDefault ConfigurationPIM dense mode is disabled by default.Command ModeGlobal Configuration modeUser GuidelinesOnly one of sparse or dense mode can be configured on a router. DVMRPmust be disabled before enabling PIM.Exampleconsole(config)#ipv6 pim denseipv6 pim dr-priorityUse the ipv6 pim dr-priority command to set the priority value for which arouter is elected as the designated router (DR). Use the no form of thiscommand to set the priority to the default.
