Layer 3 Routing Commands 1375UPDATE Send Failures....................... 0Current Members: 172.24.3.1, 172.25.8.56, 172.28.9.1Version Delta T Duration UPD Built UPD Sent Paths Sent Pfxs Adv Pfxs Wd10 00:00:49 100 6 288 5 1250 750show ip bgp vpn4Use the show ip bgp vpn4 command to display the VPNv4 addressinformation from the BGP table. If the vrf argument is specified, the addressinformation pertaining to that VRF is displayed.Syntaxshow ip bgp vpnv4 {all | rd route-distinguisher [ipprefix/length]| vrf vrf-name [ip-prefix/length] | statistics }• all— Displays the complete VPNv4 database.• rd route-distinguisher—Displays the NLRI prefixes that match the namedroute distinguisher.• vrf vrf-name—Displays the NLRI prefixes associated with the named VRFinstance.• ip-prefix/length — IP address of a network in the routing table and thelength of the mask (0 to 32). The slash mark must be included.• statistics — Displays BGP VPNv4 statisticsDefault ConfigurationThere is no default configuration.Command ModePrivileged Exec and Global Configuration modesUser GuidelinesThe format and field descriptions are the same as for show ip bgp neighborswith the following exceptions:• If the peer address (“Remote Address”) is a link local address, the next lineof output indicates the scope of the address.
