Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 131C ONFIGURING SYSTEM O PTIONS AND I NFORMATIONSystem InformationThe following table summarizes the identifying and authenticating information used by eachremote device type to connect to the system:S YSTEM INFORMATIONCONFIGURING S YSTEM I NFORMATIONU SING CFGEDIT1. Select option (2), System Information from the System Options and Information menu. If youneed guidance to find this menu, refer to the instructions provided in the System Optionsconfiguration section. The following screen will be displayed:2. Select the option you wish to configure and press . Follow the onscreen instructions toconfigure the option you select. These values are required only if there are remote devices onthe network that require this information for system validation.SYSTEM I NFORMATION CONFIGURATION ELEMENTSS YSTEM N AMEThe System Name is a user-defined name for the CyberSWITCH. This name is preconfigured, butmay be changed. It is from 1 to 17 ASCII characters in length. The System Name is only used if thereare remote devices on the network that require this information for system validation. This nameis passed in the name field during PAP negotiation.Device Type Identifier AuthenticatorHDLC Bridge(MAC LayerBridge)Bridge EthernetAddressorCalling Line IdBridge Ethernet AddressOptional: PasswordOptional: Calling Line IdIP Host(with RFC 1294encapsulation)IP Host Id IP Host IdOptional: Calling Line IdPPP Device Name CHAP SecretorPAP PasswordOptional: Calling Line IdSystem Information Menu:1) System Name is "ralph"2) System Password is "ralph"3) System Secret is "ralph"Select function from above or for previous menu: 1