Small Office Remote Access Switch 545SYSTEM S TATISTICSCompression StatisticsC OMPRESSION S TATISTICSThe system collects the following compression statistics for each active compression connection.These statistics can be displayed by issuing thecmp stats or thecmp stats command at the administration console. Thecmp stats command will display the compressionstatistics for all active connections. Thecmp stats name> command will display thecompression statistics for the specified device. Note that the device name is case sensitive.Note: When using PPP, it is possible that CCP can open with no agreed upon compressionalgorithm in one or both directions. In such cases, the connection is considered to berunning with compression, and will consequently be picked up by the CMP command.However, the ratios and counters for the direction(s) without an actual compressionalgorithm negotiated will not indicate any effective compression or decompression.COMPRESSION RELATED STATISTICScmp ratioThe number of uncompressed bytes divided by the number of compressed bytes.uncmp KbytesThe total number of uncompressed kilobytes received.cmp KbytesThe total number of compressed kilobytes sent.total cmp reset countThe total number of compression resets (peer and System sent resets).peer sent resetsThe number of compression resets sent from peer devices.system sent resetsThe number of decompression resets sent from the System.dropped pktsThe number of dropped packets that could not be queued.DECOMPRESSION RELATED STATISTICSdmp ratioThe number of decompressed bytes divided by the number of compressed bytes.dmp KbytesThe total number of decompressed kilobytes sent.cmp KbytesThe total number of compressed kilobytes sent.total dmp reset countThe total number of decompressed resets (peer and System sent resets).