Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE246 CyberSWITCHNotes: The DHCP Server must have a route specified to get back to the DHCP-enabled routerAlex, or use Alex as its default gateway.When you are using a RLAN Interface, you are limited to one subnetwork.Configuration for IP Router "Alex" Configuration for Remote Bridge "Ruby"System Information:System Name = AlexSystem Password = stoneSystem Information:System Name = RubySystem Password = rubbleSecurity Level = Device Level (On-nodeDevice Database, PAP security)Security Level = Device Level (On-nodeDevice Database, PAP security)Bridging disabled Bridging enabledBridge Packet Data Filter: offset=1;mask=00;value=00;action=CONNECT;dist list=“Alex”IP enabled (router mode)I/F = LAN (192.168.1.168)I/F = WAN RLAN(204.157.42.190)IP disabledDHCP enabledRelay Destination # 1 = 192.168.1.5(interface = “N/A”)Hop Count Threshold = 4DHCP disabledDevice = “Ruby”ISDN Line Protocol = PPPDial Out Phone # = 5311PAP Password = “rubble”IP Address = 204.157.42.0IP Routing = disabledBridging = enabledMake calls for Bridge data = disabledDevice = “Alex”ISDN Line Protocol = PPPDial Out Phone # = 5411PAP Password = “stone”IP Address = (none)IP Routing = disabledBridging = enabledMake calls for Bridge data = enabled