Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE466 CyberSWITCHCALL T RACE MESSAGE SUMMARYAccess information discarded causeCall trace message. This message is used to indicate additional details on the received in the “call progress” information message.Alerting offInformational call trace message. The alerting signal information element is off. This indicatesadditional details on the received in the “call progress” information message.Alerting on - pattern Informational call trace message. This indicates additional details on the received inthe “call progress” information message.Answer tone onInformational call trace message. This message is used to indicate additional details on the value> received in the “call progress” information message.Call has returned to the ISDNInformational call trace message.Call is not end-to-end ISDNOne or more of the WAN phone networks used to connect the call is not an ISDN network. The callmust be at 56 Kbps.Call waiting tone onInformational call trace message. It indicates additional details on the received inthe “call progress” information message.Custom tone onInformational call trace message.Delay in response at called interfaceInformational call trace message.Destination call address is non-ISDNInformational call trace message.Dial tone onInformational call trace message.Disconnect for tone onThis message indicates that the system disconnected the outbound call. The valuesare: error tone, busy verify, confirm, busy, network congestion, or intercept. These tone valuesindicate a temporary network failure. Check the outbound phone number and try again. If theproblem persists, contact your phone company.Expensive routing tone onInformational call trace message.