Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE512 CyberSWITCHcdr verifyGenerates a sample message to all servers that have been configured for CDR. A messagesimilar to the following will be displayed: name> CDR VERIFY 1 of 1Refer to Log Commands for the commands that will allow you to display or erase CDR log reports.C ALL R ESTRICTION C OMMANDSWhen the Call Restriction feature is enabled on the CyberSWITCH, the following command isavailable through the administration console:cr statsDisplays the current Call Restriction statistics. Refer to Call Restriction Statistics, for a list ofavailable statistics and their definitions.Other Call Restriction commands are available through Dynamic Management. Refer toConfiguring Call Control for these commands.C OMPRESSION I NFORMATION C OMMANDSCompression statistics are only available for connections that are using a compression protocol.The following commands are used to display current compression information:cmp statsDisplays the compression statistics for all active connections. Refer to Compression Statistics, fora list of available compression statistics and their definitions.cmp stats name>Displays the compression statistics for the indicated device. Refer to Compression Statistics, fora list of available statistics and their definitions. Note that the device name is case sensitive.cmp clear name>Clears the compression statistics for the indicated device. If the device name is omitted, nocompression statistics will be cleared. Note that the device name is case sensitive.cmp clearallClears the compression statistics for all devices.DHCP C OMMANDSThese commands allow you to display or erase DHCP statistics.DHCP statsDisplays the DHCP statistics. For a listing of available statistics and their definitions, refer toDHCP Statistics.DHCP stats clearClears the DHCP statistics.