Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE598 CyberSWITCHsentry radius attempts an authentication session using RADIUSsentry status displays current status of user level authentication serverssentry log logs rejection messages from the authentication serversession displays the current active administration sessionssession kill terminates the active session specified by the session idsnmp stats displays current SNMP related statisticssp lists each semi-permanent device and associated statusstatus (GUEST) displays system errors and system messagestcp conns displays the current TCP connection statustcp stats displays the current system TCP statisticstelnet puts you in the Telnet command modeseetelnet mode commands for available commandstelnet [port # ] begins a Telnet session for the indicated Telnet hosttelnet mode commands:closeexitopen [target host][port # ]send [send parameter]set statustogglecloses the current Telnet connection to a target hostcloses the current Telnet sessionestablishes a Telnet session with a target hostsends special Telnet control functions to the currentlyconnected target hostsets operating parameters for the current Telnet sessionprovides information about the current Telnet sessionsets operating parameters for the current Telnet sessionterm displays the terminal type.term set sets the terminal typetftp get invokes the TFTP GET commandtftp put invokes the TFTP PUT commandtftp session displays TFTP session statisticstftp session kill terminates the active TFTP session specified by the sessionidtftp stats (GUEST) displays the current TFTP statisticstime [hours:minutes:seconds] displays or changes current system timetrace [on/off] enabled or disables call trace information reportstrace ipxwan [on/off] enables or disables the IPXWAN tracing optionCommand Use