Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE550 CyberSWITCH# Line Not Ready CountThe number of times the physical link underlying the Frame Relay Access has become unusable.# Frames ReceivedThe total number of frames received on the Frame Relay Access. This is the sum of the number offrames received on each PVC associated with this access.# Frames SentThis item refers to the total number of frames sent on the Frame Relay Access. This is the sum ofthe number of frames sent on each PVC associated with this access.# Bytes ReceivedThe total number of bytes received on the Frame Relay Access. This is the sum of the number ofbytes received on each PVC associated with this access.# Bytes SentThe total number of bytes sent on the Frame Relay Access. This is the sum of the number of bytessent on each PVC associated with this access.# Reset Rx SeqThe number of times the receive sequence variable had to be reset. This event occurs when a receivesequence number of ‘0’ is received from the network.# Reset Tx SeqThe number of times the transmit sequence variable had to be reset. This event occurs when atransmit sequence number of ‘0’ is received from the network.# Lost Rx SeqThe number of times a receive frame was lost. This event is indicated by a break in the receivesequence numbers of received frames (i.e., the receive sequence number of a particular receiveframe did not compare with the software’s expected receive sequence number).# Lost Tx SeqThe number of times a transmit frame was lost. This event is indicated by a break in the transmitsequence numbers of received frames (i.e., the transmit sequence number of a particular receiveframe did not compare with the software’s expected transmit sequence number).# Lost Rx FrameRelated to the “# Lost Rx Seq” counter in that it represents the number of actual lost frames, not justthe number of times a frame (or frames) was lost.# Invalid Frame SizeThe number of times a frame is discarded because it exceeded the maximum frame size supportedby the frame relay network.# Timed Lost Rx FrameNot currently supported.# No Control BlockNot currently supported.