USER’S GUIDE502 CyberSWITCHlist [/c] [BIN]Displays an ASCII file - pausing after every 24 lines. If the “/c” option is used, pausing isdisabled. If the BINary option is selected, the files will be displayed in UUENCODED format.del Deletes the specified file (assuming you have the appropriate access level to do so). Theattributes for this command track TFTP rights. Be sure to specify the file’s full pathname.T ERMINATING A DMINISTRATION S ESSIONSThe following commands are used to display and to terminate active administration sessions.sessionThis command will display the current active administration sessions. The example screenbelow illustrates the format in which this information is displayed:The fields in this display are defined as follows:Login-IdThe access level associated with the session. Possible access levels include:admin: administrator accessguest: guest accessnobody: someone has initiated a Telnet session with the CyberSWITCH but did not login.Note: If you have configured multiple admin login names on your off-node server, the login-id field will not distinguish between the various names. Use the sess-id field to helpidentify the different admin users.Sess-IdThe session Id number associated with the session.Date/TimeThe date and time the session was initiatedIdle (sec)The number of seconds the connection has been idle.CommandHow the administration session was initiated. Initiation methods include:manage - the user is in the Manage Modesession - the user is using a Telnet sessionType (from)The type of session. Possible session types include:console - a session through the local consoletelnet - a Telnet sessionLogin-Id Sess-Id Date/Time Idle(sec) Command Type (from)-------- ------- --------- ---------- ------- -------------------ADMIN 0 Aug 15 13:50 51 MANAGE ConsoleADMIN 257 Aug 15 13:55 0 SESSION Telnet (199.120.211.120)
