Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 221CONFIGURING A DVANCED IP ROUTINGStatic Route Lookup via RADIUSI SOLATED M ODE CONFIGURATION ELEMENTSI SOLATED MODE STATUSYou may enable or disable the Isolated Mode option.I SOLATED M ODE BACKGROUND I NFORMATIONWhen operating with isolated mode enabled, the CyberSWITCH does not relay IP datagramsreceived from the WAN to other IP routers/hosts located on the WAN. IP datagrams received fromthe WAN will be discarded if they need to be forwarded over the WAN. IP datagrams received onthe LAN interface are forwarded to each required interface.WAN-to-LAN and LAN-to-LAN routing still works if Isolated Mode is enabled.S TATIC ROUTE L OOKUP VIA RADIUSNote: This option is only applicable when a RADIUS Server is in use.CONFIGURING S TATIC ROUTE L OOKUP VIA RADIUSU SING CFGEDIT1. Select Static Route Lookup via RADIUS (Enable/Disable) from the IP menu.2. Follow the onscreen instructions to either enable or disable this feature.U SING M ANAGE M ODEipradiusDisplays the current enabled status of the IP route lookup via RADIUS feature.ipradius offDisables the lookup of IP routes lookup via RADIUS.ipradius onEnables the lookup of IP routes lookup via RADIUS.STATIC R OUTE VIA RADIUS CONFIGURATION E LEMENTSS TATIC R OUTE VIA RADIUS S TATUSYou may enable or disable this option.STATIC R OUTE L OOKUP VIA RADIUS BACKGROUND I NFORMATIONThe Static Routes Lookup via RADIUS option allows you to maintain static routes for devices onthe RADIUS Server. When there are multiple CyberSWITCHes at one site, the IP static routesinformation needs to be duplicated on all systems. The Static Route Lookup via RADIUS featureallows you to maintain all of the IP static routes information for multiple systems on the RADIUS