Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE488 CyberSWITCHThe default file access for the GUEST user is “read” access to all files. The default file access for theADMIN user is “read” access to the report and statistics files, and “read and write” access to allother files. The default for the TFTP server is ADMIN file access rights. The possible file types andpossible accesses for each user are:where:“R” for read only file access“W” for write file access“N” for no access rights for the corresponding file typeActual files included in the file type categories are as follows:Note: If you use TFTP to copy over configuration files to the CyberSWITCH, the newconfiguration will not take place until the CyberSWITCH is restarted. This may beaccomplished with Telnet session and issuing therestart command. The Telnet sessionmust then be reestablished.USAGE I NSTRUCTIONSThe CyberSWITCH has both the client and server TFTP components built into it. When using theCyberSWITCH as the local client, enter the following command(s) to transfer files:tftp put ortftp getThetftp put command transfers files to the remote host; thetftp get command retrievesfiles from the remote host. For either command you will then be prompted for the IP address of theremote host, the complete path of local file name, the complete path of the remote file name, andthe file mode (binary or ASCII). You will be notified of the status of the transfer.There is atftp stats command that gives the user statistics on the TFTP feature. Statistics forthe server (or remote) side imply that someone from a remote device (either on the LAN or WAN)initiated the request to transferred files to (or from) the CyberSWITCH. Statistics for the client (orlocal) side imply that the user on the CyberSWITCH initiated the request to transfer files to a remotedevice. The following statistics are available for both the server and client sides:• Number of successful file puts• Number of successful file gets• Number of failed file puts• Number of failed file gets• Total bytes put• Total bytes getUsers Report Files Statistics Files Config files Other FilesGUEST RN RN RN NADMIN RN RN RWN RWNFile category File types included in the categoryReport RPRT_LOG.1 - 10Statistics STAT_LOG.1 - 10Configuration *.NEI (with the exception of CFGTOKEN.NEI)Other All other file types: .EXE, .COM, .TXT, (CFGTOKEN.NEI), etc.