Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

T RACE M ESSAGESOVERVIEWTrace messages include the following categories of messages:1. Call Trace Messages2. IP Filter Trace Messages3. PPP Packet Trace Messages4. WAN FR_IETF Trace Messages5. X.25 Trace Messages6. X.25 (LAPB) Trace MessagesBefore trace messages can be logged to the system report log, you must first enable the type of traceyou would like to use. Once enabled, the system includes the trace messages in the memory-resident report log. To access this log, use the following commands:dr ords display reports or display statisticser ores erase current messages/statistics from memorywr orws write reports/statistics to diskWhen the system writes system messages to disk, it stores them in the following locations:Directory: \logFile Name: rprt_log.nn(where “nn” is an integer that is incremented each time a new file iswritten.)The system reports messages using the following format:Where:• The Message Type quickly identifies the type of message the system reports.• The Time identifies when the message was reported.• The Report Number is used by your Distributor or Cabletron Customer Support.• The Message text describes the actual message being reported.Below, there is a separate section included for each category of trace messages. For each category,a definition of the trace message type, the command to enable/disable the logging of the tracemessages, and an alphabetized list of the associated messages is included.Message Type Time Report Number MessageI InformationalW WarningE Errorhour:minutes:second internal ID for areareporting themessageactual text ofthe message