Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 57U PGRADING S YSTEM SOFTWAREUpgrading SoftwareFor system upgrade, you will need to follow one of the above-mentioned upgrade paths (\productname\country\protocol or access package). This path not only depends upon product, but also theISDN Standard you will be using and the software options you have purchased. For example:• If you are installing a CSX156 in a geographical area that uses JAPAN ISDN standards, and youhave purchased the IP/IPX software option, use the files found in the \CSX156\JAPAN\ipipxdirectory.If you choose to install this information onto your hard drive, it will be placed under the followingbase directory:([drive]:\Program Files\Cabletron Systems, Inc.\)Note that these files will be specific to the configuration options you choose during installation.L OCAL SOFTWARE U PGRADETo perform a local upgrade, use any valid local administration console as described in MakingConnections. Update the SSB first, if the Release Notes indicate this is necessary, and then followwith the update of the OSW.L OCAL U PGRADE OF THE S ECOND S TAGE B OOT (SSB)1. Restart the CyberSWITCH.2. When “Waiting for Commands:” appears on the system screen, enter the following command:recover3. Wait for the system to respond with the prompt “Ready for Hex Download”. Using yourcommunications program:• Select ASCII to be the protocol used for the file transfer. Note that your communicationsprogram may use other terminology in place of “ASCII,” for example, some programs use“Send as a text file.”• Change character spacing to “0”. (This may be called by another name in somecommunications packages. For example, some programs call it character pacing.)• Set line spacing (or pacing) to “0”.• Insert the CSX diskette into the drive of your administration console.• Enter the name of the file to be transferred, using the complete pathname. For example,D:\CSX156\JAPAN\IPIPX\RECOVER1.4. You will receive a message if the upgrade completes successfully. The system will thenautomatically reboot.\CSX156\JAPAN\ipipxat.pkt UPGRADE.OSW, DEFLTCFG.OSW, RECOVER1,RECOVER2, REL_NOTE.TXT\CSX156\JAPAN\ipipx.pkt UPGRADE.OSW, DEFLTCFG.OSW, RECOVER1,RECOVER2, REL_NOTE.TXT\CSX156\JAPAN\ipipxat.x25 UPGRADE.OSW, DEFLTCFG.OSW, RECOVER1,RECOVER2, REL_NOTE.TXT