Small Office Remote Access Switch 215CONFIGURING ADVANCED BRIDGINGBridge FiltersThe following chart summarizes the forward filter actions available for Restricted Bridging:It is possible to use a discard filter action to selectively discard packets that have been forwardedthrough the previous restricted bridging forwarding filters. The following chart summarizes thediscard filter actions available for Restricted Bridging:* Device List may be the on-node device database, or it may be located on an off-node authenticationserver.FilterActionDistributionListResultFORWARD LAN A packet matching this filter will only be forward-ed on the LAN ports. The packet will not be sent toany remote sites connected over the WAN.FORWARD WAN A packet matching this filter will only be forward-ed to remote sites connected on the WAN. Thepacket will not be sent to the LAN ports.FORWARD ALL A packet matching this filter will be forwarded onthe LAN ports and forwarded to remote sites con-nected over the WAN.FORWARD Device List* A packet matching this filter will only be forward-ed to the specified Device List.CONNECT Device List* A packet matching this filter will be connected tothe specified Device List.FilterActionDistributionListResultDISCARD LAN A packet matching this filter will be discarded onthe LAN ports. The packet will be sent to allremote sites connected over the WAN.DISCARD WAN A packet matching this filter will be discarded toremote sites connected on the WAN. The packetwill be sent to the LAN ports.DISCARD ALL A packet matching this filter will be discarded onthe LAN ports and WAN ports.DISCARD Device List* A packet matching this filter will not be sent to thespecified Device List.