Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE326 CyberSWITCHDisconnect Event Report ContentsOn a disconnect event, records 1 through 4 are used. The event type is DISCONNECT. Thetimestamp reflects the time that the decision to disconnect was made. The phone number displayedis the phone number in the Connect report.The duration is calculated by subtracting the connect event time from the disconnect time.The following is an example disconnect event report:Chicago-Schaumburg 00000001 DISCONNECT 1 OF 4 MonroeCounty PORT 1/1/1Chicago-Schaumburg 00000001 DISCONNECT 2 OF 4 IN FROM 3135551212Chicago-Schaumburg 00000001 DISCONNECT 3 OF 4 64Kb 08/16/95 23:11:55Chicago-Schaumburg 00000001 DISCONNECT 4 OF 4 DURATION 01:11:55Reject Event Report ContentsOn a reject event, records 1 through 4 are used. The event type is REJECT. The timestamp reflectsthe time that the decision to disconnect was made. An incoming phone number is displayed if it isprovided by the telephone switch. Not all switches provide calling line identification. A phonenumber is always displayed for outbound calls.The duration is calculated by subtracting the ISDN connection timestamp (the time that the ISDNconnect message was received from the switch) from the reject event timestamp.The following is an example reject event report:Chicago-Schaumburg 00000001 REJECT 1 OF 4 UNKNOWN PORT 1/1/1Chicago-Schaumburg 00000001 REJECT 2 OF 4 IN FROM 3135551212Chicago-Schaumburg 00000001 REJECT 3 OF 4 64Kb 08/16/95 23:11:55Chicago-Schaumburg 00000001 REJECT 4 OF 4 DURATION 00:00:07System Up Event Report ContentsOn a System Up event, only record 1 is used. The event type is SYSTEM UP. No data is filled in forthe Remote Device Name field or the Port field.The following is an example reject event report:Chicago-Schaumburg SYSTEM UP 1 OF 1Verify Event Report ContentsOn a Verify event, only record 1 is used. The event type is CDR VERIFY. No data is filled in for theRemote Device Name field or the Port field.The following is an example verify event report:Chicago-Schaumburg CDR VERIFY 1 OF 1