Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 325C ONFIGURING O THER ADVANCED O PTIONSLog OptionsD ATA R ATEThis field indicates the data rate for a B channel. The possible values are 56 Kb, 64 Kb and 384 Kb.D URATIONThis field reflects the time that a connection is active; it is presented in hours, minutes and seconds.The precise meaning varies somewhat for a successful connection versus a call rejection.EVENT T YPEThis field indicates what type of event the associated message is reporting. The possible values are‘CONNECT’, ‘DISCONNECT’, ‘REJECT’, ‘SYSTEM UP’ and ‘CDR VERIFY’.NAS NAMENAS Name (Network Access Server Name) contains the System Name of the system logging themessage.PHONE NUMBEROn incoming calls this field contains the Calling Line Id of the caller if the information is available(some switches do not provide Calling Line Id). On outgoing calls, this field contains the phonenumber of the remote device that the system is calling.REMOTE DEVICE NAMEThis field contains the name of the remote device, if available.SLOT, LINE AND BEARERThis field identifies the slot (or resource), the line and the bearer channel used for the associatedconnection.TIME STAMPThe field contains the time and date. The meaning of this field varies depending upon the report.Connect Event Report ContentsOn a connect event, records 1 through 3 are used. The event type is CONNECT. The timestampreflects the time that the ISDN connect message was received from the switch. An incoming phonenumber is displayed if it is provided by the telephone switch. Not all switches provide calling lineidentification. A phone number is always displayed for outbound calls.The following are example connect event reports:example 1:Chicago-Schaumburg 00000001 CONNECT 1 OF 3 MonroeCounty PORT 1/1/1Chicago-Schaumburg 00000001 CONNECT 2 OF 3 IN FROM 3135551212Chicago-Schaumburg 00000001 CONNECT 3 OF 3 64Kb 08/16/95 23:11:55example 2:Chicago-Schaumburg 00000001 CONNECT 1 OF 3 MonroeCounty PORT 1/1/1Chicago-Schaumburg 00000001 CONNECT 2 OF 3 OUT TO 3135551212Chicago-Schaumburg 00000001 CONNECT 3 OF 3 64Kb 08/16/95 23:11:55Note: In most cases, a device is identified when a connect event occurs and the device name isincluded in the connect report. With user level security, the connect event occurs before theuser is identified. Therefore, the connect report will contain a name of UNKNOWN. Thedisconnect report will have the actual user name, as determined by SENTRY. Theconnection Id from the connect and disconnect reports will match.