| 
USER’S GUIDE450 CyberSWITCHSemipermanent. Device "x" reconnected by admin.The administrator has issued thecall device command after issuing thedisc device name> command. This restarts the semipermanent feature for theindicated device.Severe congestion CLLM received for DLCI A CLLM message was received indicating severe congestion may be expected on the PVCassociated with the indicated DLCI.Signal for unknown CallCmd task: Contact your Distributor or Customer Support. Cfg ErrorLine vs. adapter configuration error. A line is configured for port that does not exist onthe adapter in slot .[SNMP] Authentication failure, improper access rightsThere are two possible causes for this message:• The SNMP Agent received a SetRequest PDU that contained a Community Name with an MIBaccess level of MIB GUEST or MIB USER. The MIB access level must be MIB ADMIN to per-form a SetRequest. The request was discarded.• The SNMP Agent received a PDU that contained a Community Name with an MIB access levelof MIB GUEST and an object Id that cannot be accessed with an MIB GUEST access level. Therequest was discarded.[SNMP] Authentication failure, unknown community nameThe SNMP Agent received a request PDU whose community name is not configured in theCommunity Names Table. The request was discarded.[SNMP] SNMP initialization failure - unable to allocate necessary memoryThe SNMP feature was unable to initialize because it could not obtain the necessary memory. TheSNMP feature is disabled and no SNMP request will be processed. Contact your Distributor orCustomer Support.[SNMP] SNMP initialization failure - unable to open UDP portThe SNMP feature was unable to initialize because it could not obtain the necessary UDP port. TheSNMP feature is disabled and no SNMP request will be processed. Check the configuration, andthen contact your Distributor or Customer Support.[SNMP] SNMP initialized successfullyThe SNMP Agent has been successfully initialized and is fully operational.[SNMP] Unable to obtain an SNMP Trap queue entry bufferThe SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could notobtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.[SNMP] Unable to obtain an SNMP Trap queue headerThe SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could notobtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support. |
