Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 547SYSTEM S TATISTICSDHCP StatisticsDHCP R ELAY A GENT STATISTICSBOOTREQUEST msgs rcvdIncremented whenever the system identifies a UDP datagram as a DHCP/BOOTPBOOTREQUEST message. This datagram has passed the initial consistency checks.BOOTREQUEST msgs rlydIncremented whenever the system has successfully “relayed” a BOOTREQUEST message to aconfigured destination (i.e., another Relay Agent, or a DHCP/BOOTP server).BOOTREQUEST no dests cfgNumber of DHCP/BOOTP BOOTREQUEST messages received by the DHCP Relay Agent thatwere discarded due to the fact that there weren’t any relay destination addresses configured.BOOTREQUEST over max hopsIncremented whenever the DHCP Relay Agent has received a DHCP/BOOTP BOOTREQUESTmessage with a ’hops’ field that has exceeded the maximum allowable value. These messages arediscarded.BOOTREQUEST no giaddr I/FNumber of DHCP/BOOTP BOOTREQUEST messages received by the DHCP Relay Agent with’giaddr’ fields of ’0.0.0.0’ that were discarded due to the fact that they were received overunnumbered interfaces. It will not be possible to return a reply to the client, since we have notdetermined on which network interface the client is located.BOOTREQUEST bad rly destNumber of DHCP/BOOTP BOOTREQUEST messages received by the DHCP Relay Agent thatwere discarded due to the fact that the Relay Agent must not rebroadcast messages on the samenetwork interface on which they were received.BOOTREQUEST msg too bigNumber of times that the DHCP Relay Agent aborted sending a BOOTREQUEST message due tothe fact that the message was too big to fit into a buffer allocated from the Relay Agent’s transmitbuffer pool.BOOTREQUEST no bufferIncremented whenever the DHCP Relay Agent cannot successfully get a buffer from the RelayAgent’s transmit buffer pool when trying to relay BOOTREQUEST messages to multipledestinations.BOOTREQUEST xmit failNumber of UDP subsystem errors returned to the DHCP Relay Agent while it was trying to sendBOOTREQUEST messages to configured destinations.BOOTREPLY msgs rcvdIncremented whenever the system identifies a UDP datagram as a DHCP/BOOTP BOOTREPLYmessage. This datagram has passed the initial consistency checks.BOOTREPLY msgs rlydNumber of BOOTREPLY messages that were successfully relayed to DHCP/BOOTP clients.