Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE306 CyberSWITCHthe port number. This example shows that there is only one BRI adapter, and it is installed inslot number one, and has four ports. There is a line for each port number.4. Press 1 to add a device profile.5. Enter a user-defined unique name to identify the profile. We will use Central_Site for ourexample profile name. The following screen will then be displayed:6. Press 1 to add a new line. This will assign a line to the profile you are configuring.7. The screen will show all data lines that were previously configured. Follow the prompts toenter the slot number and port number of the line you are reserving for this profile.8. You may continue adding new lines for this profile, or press to exit this menu sequence.Notes: Listing or adding a line under a profile doesn’t, by itself, reserve the line for deviceswith that profile. Listing the line simply means that devices with that profile areallowed to use the line. To reserve a line, you must guarantee that the line is listed for aunique profile only. In other words, no lines are reserved for a profile unless that lineis assigned to that profile AND also unassigned to all other profiles.Adding a device profile does not affect the default profile. You may want to considerdeleting the lines you are reserving for your profile from the default profile. To deletethe reserved lines from the default profile, press 2 at the Device Profile screen to changea profile. Follow the on-screen instructions to delete a line from the default profile. Thiswill reserve the line for a specific device and no one else.To reference the specific device profile in the device list:Assigning a specific device profile to a device will give that device usage of the line you configuredin the above section. To assign a specific device profile to a device you need to enter the deviceprofile information when you are configuring the device’s ISDN information. You may eitherconfigure the device profile information when you are first adding the device, or you may add theinformation later. To enter the profile information:1. Select "3" from the main menu to configure security.2. Select "3" from the Security Menu to configure device level database information.3. Select "2" from the Device Level Databases Menu to configure on-node device database entries.4. If this is a new device, follow the onscreen instructions to add a device. If this is a previouslyconfigured device, select the device Id for the device for which you will add a device profile.Profile NAME = Central_Siteis currently allowed access to:id Line id Line----------------------------------------No Lines Configured(1) Add new line, (2) Delete Line or press for previous menu?