Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 419SYSTEM M ESSAGESSystem Message Summary[DHCP-P] Proxy Client disabledThis message indicates that the DHCP Proxy Client has been successfully disabled. This messagewill appear after the DHCP Proxy Client has been disabled from Manage Mode.[DHCP-P] Proxy Client enabledThis message will appear whenever the DHCP Proxy Client has been successfully enabled. Thiscould be during system initialization (if configuration values have enabled it), or after the DHCPProxy Client has been enabled from Manage Mode.[DHCP-P] Proxy Client initialization failedThis message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP ProxyClient will not be operational. Contact your Distributor or Customer Support.[DHCP-P] UDP port (67) closedThe DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPS UDPport (port 67). If the DHCP Relay Agent is enabled, the BOOTPS port must remain open. If this isthe case, the DHCP Proxy Client will not close the UDP port.[DHCP-P] UDP port (67) openedThe DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). Thismay occur during system initialization, or after the DHCP Proxy Client has been enabled fromManage Mode. If the DHCP Relay Agent is also enabled, it may not be necessary for the ProxyClient to open this UDP port.[DHCP-P] UDP port (68) closedThe DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPC UDPport (port 68).[DHCP-P] UDP port (68) openedThe DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). Thismay occur during system initialization, or after the DHCP Proxy Client has been enabled fromManage Mode.[DHCP-R] Failed to allocate memory for transmit buffer poolThe system was unable to allocate memory for the DHCP Relay Agent’s transmit buffer poolduring initialization. The Relay Agent will not become operational. Contact your Distributor orCustomer Support.[DHCP-R] Failed to close UDP port (67), erc = An error occurred while the device was trying to disable the DHCP Relay Agent from ManageMode. Contact your Distributor or Customer Support.[DHCP-R] Failed to open UDP port (67), erc = An error occurred while attempting to enable the DHCP Relay Agent. The Relay Agent must openthe BOOTPS UDP port in order to operate successfully. If this port could not be opened, the RelayAgent will not be enabled. Contact your Distributor or Customer Support.[DHCP-R] Relay Agent disabledThe DHCP Relay Agent has been successfully disabled. This message will appear if the userdisabled the Relay Agent from Manage Mode.