Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 497S YSTEM COMMANDSViewing Throughput Informationconnections available is less than that amount (33). This means that any of the followingcombinations of connections would be allowed:If there was enough memory for all connections, the connection table would reflect bothpotential and actual connections as the same number.wan statsDisplays the current system WAN connection statistics. Refer to WAN Statistics, for a list ofavailable statistics and their definitions.From the “Connection Monitor” screen you can press: Keys>To select a site that is currently connected.To view throughput monitoring for the selected site. Refer to the section titled ViewingThroughput Information, for details.To exit the Connection Monitor screen.V IEWING T HROUGHPUT I NFORMATIONThe Throughput Monitor screen displays the system throughput monitoring feature in action. Toenter this screen:1. Issue themc command to display the connection monitor screen.2. Use the to move the cursor down to the specific site for which you would like toview throughput information.3. Press to display the throughput monitor screen for that site.Throughput monitoring information can be very useful for fine-tuning your bandwidthconfiguration parameters. Note that this feature is not available through a Telnet session. Refer tothe Configuring Call Control chapter for a complete description of throughput parameters.The actual bandwidth utilization, along with the current underload setting, is displayed for eachthroughput sample. After 32 samples are displayed, the newest sample is displayed at position 32and all other samples are shifted left one position.Physical Connections X.25 Frame Relay8 25 00 32 10 0 332 2 29