Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE494 CyberSWITCHcsDisplays the list of connected devices along with the data rate for each device. The output forthis command contains the connection time for each device along with a detailed breakdown(per connection type) of channel usage and available data rates. If there is at least one deviceconnected, the display will look as follows. Note that a “more” mechanism will be used whenthe number of connected devices exceeds a full screen. If there are no devices connected, thecscommand does not produce any output.drDisplays reports of system messages. Refer to the chapters titled System Messages or TraceMessages for message definitions.dsDisplays system statistics. For details on the available system statistics refer to the SystemStatistics chapter.list [file name]Displays the indicated file.For example, to display the Release Notes, enter the following command:list rel_note.txtThe “more” mechanism is used to view the indicated file. To view the next section of the file,simply press any key (except). The system will automatically return to the normalsystem prompt after the entire file has been displayed. If you are viewing the Release Notes,press the key to exit the release notes and continue with the installation.If the file name is incorrect, the following message will be displayed:Cannot find file "file name"mcDisplays the Connection Monitor screen. This screen provides information on the remote sitesto which the system is currently connected. The system updates the display as connections areadded or removed.To display the Connection Monitor screen, Telnet and the terminal emulator must both be setas the same terminal type. Use theterm set command to do this.Note: Themc command is also available if you are remotely connected to the CyberSWITCHby Telnet.neifThis command will display the system interface table. This table provides information for eachof the system’s physical interfaces, including interface name, interface type, slot and port[System Name]> CSNumber of Channels Data Rate (Kbps) Connect TimeDevice Name Swi Ded FrR X25 Tot Swi Ded FrR X25 Tot (hr:min:sec)---------------- ------------------ --------------------- -----------Tokyo 1 0 0 0 1 64 0 0 0 64 00:31:39Ann Arbor 1 1 0 0 2 64 64 0 0 128 12:22:18New York 4 0 0 0 4 256 0 0 0 256 04:02:22