Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 413SYSTEM M ESSAGESSystem Message SummaryCall Restriction statistics reset for new dayCall Restriction device information.Call Restriction statistics reset for new monthCall Restriction device information.Call Restrictions will allow calls to be made this hourCall Restriction device information.Call Restrictions will allow calls, but this hour is restrictedCalls are restricted during this hour but the action configured is to “Warn”. Calls are still beingallowed.Call Restrictions will allow calls to be madeA Call Restriction limit has been exceeded but calls will still be allowed.Call Restrictions will no longer allow calls to be madeA Call Restriction limit has been exceeded and calls will no longer be allowed. Existing calls willNOT be forced down.Call Restrictions will not allow calls to be made this hourCall Restriction device information.Call Summary for - Calls/Day=x Calls/Mth=x Mins/Day=x Mins/Mth=xCall Restriction device information. Displays daily/monthly call totals at the end of a day or amonth.Cannot make Bridge Dial Out call. No device found.Check configuration to insure that device is properly configured.Can only do SPEECH and 3.1K AUDIO calls in HOST_CALL_REQUESTAn improper outgoing call was attempted on an RBS line. Ensure that the device that is being calledis a digital modem device and ensure that the “dm” flag has been added to peer calls.Can’t call Dial Out User. Security is not Device Level.Check configuration. Bridge Dial Out requires device-level security and a properly configuredDevice List.Can’t start offnode server lookup of Dial Out User.CyberSWITCH unable to send out a request to the off-node server. One of two possibilities: theremay be problems communication on the LAN, or the server may not be configured properly. VerifyLAN connectivity with server, and then check to see if server configured properly.Calls Activexx Active SitesCurrent number of sites connected.Calls Activexxx to Bandwidth to each site.