Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 309C ONFIGURING C ALL C ONTROLSemipermanent Connections6. Determine if the CyberSWITCH should always retry a call. If yes, then configuration for thedevice is done, the device is entered into the semipermanent device list, and appears as shownbelow. If no, continue to step 7.7. Enter the maximum number of times to retry a call.8. Enter the time interval during which the CyberSWITCH keeps track of disconnects.9. Determine if the CyberSWITCH should attempt to retry a call after a rejection. If yes, continueto step 10. If no, then configuration for the device is done, the device is entered into thesemipermanent device list, and appears as shown below.10. Enter the time interval before a call is retried. The device is entered into the semipermanentdevice list, and appears as shown below.U SING M ANAGE M ODE C OMMANDSsemipermDisplays the semipermanent connection menu. The configuration screens are identical to thosedisplayed by CFGEDIT. Refer to the above section for instructions.semiperm [add] [change] [delete]Adds, changes, or deletes a semipermanent connection from the current configuration.Semipermanent Connections Menu:id Device Name Max Retries Over Interval Session Interval------------------------------- ------------- --------------- ------------------1 "Mike Mason" ( ALWAYS CALL BACK )(1) Add, (2) Change, (3) Delete a Semipermanent Connectionor for previous menu:Semipermanent Connections Menu:id Device Name Max Retries Over Interval Session Interval------------------------------- ------------- --------------- ------------------1 "Mike Mason" 10 10 Mins N/A(1) Add, (2) Change, (3) Delete a Semipermanent Connectionor for previous menu:Semipermanent Connections Menu:id Device Name Max Retries Over Interval Session Interval------------------------------- ------------- --------------- ------------------1 "Mike Mason" 10 10 Mins 60 Mins(1) Add, (2) Change, (3) Delete a Semipermanent Connectionor for previous menu: