Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

Small Office Remote Access Switch 525S YSTEM COMMANDSPacket Capture CommandsBanyan Vines Packet Detail Screen (Bridged Packet)IP Datagram Detail Screen (Routed Datagram)While the “pkt display” is displayed on your monitor, you can display the following helpscreen by entering “?”:The time menu that is displayed when “t” is entered will enable you to toggle the timeincrement to be in either Sec (seconds), mSec (milliseconds), or tSec (deciseconds).When the packet marking option is used, all packet times will be displayed relative to thatmarked packet. To mark a packet, use the arrow keys to move the cursor to the selected packetnumber, then press "m" The time for that packet will be set to 0. All packets received before thatpacket will have negative time values. All packets received after that marked packet will haveprogressively higher positive time values.Packet Number Received at Time Packet Length0021 0000022190 mSEC 0060Destination Address Source AddressFFFFFFFFFFFF 02608C9BED38EtherNet Type is 0BAD, VINES IPCheck Sum Packet Length Protocol TypeD75D 0x001A 04, ARPTransport Control Hop Count0 0Dest Network Dest SubNet Source Network Source SubNetFFFFFFFF FFFF 00000000 0x0000Packet Type Network Number Subnetwork NumberQuery 126697007 0x9183Hit Escape to EXIT Packet DetailsPacket Number Received at Time Packet Length0009 0000003190 mSEC 0028Destination Address Source Address001.001.001.001 001.001.001.00145 00 1C 00 01 00 00 00 40 01 76 DD 01 01 01 01 E.......@.v.....01 01 01 01 08 00 C3 ED 34 12 00 00 ........4...Hit Escape to EXIT Packet DetailsESC - Exit Menu‘u’ - Previous Menu‘d’ - Next Menu‘h’ - Top of Packet List‘e’ - End of Packet ListEnter - Display Packet Details‘t’ - Time Menu‘m’ - Marks Packet as Start TimeCursor- to select an entryHit any key to exit Help