Cabletron Systems CyberSWITCH CSX150 User Manual

Also see for CyberSWITCH CSX150: User guide Quick start guide

Contents

USER’S GUIDE520 CyberSWITCHOptional parameter that indicates the number of seconds to wait for a reply. The valid rangefor the time out value is 1 to 60 seconds. The default value is 10.Note: The ipx diag and the ipx ping commands both test device connectivity (although bothsend back different types of responses). However, due to the variety of vendors andequipment available to networks, one command may work with a particular vendor orfile server, while the other may not. If you are not experiencing success with ipx diag,try ipx ping, and vice versa.ipx ping ipx address>Tests connectivity to the specified IPX device by sending out a data packet (echo message). Ifconnection is up, device responds with an echo reply.host ipx addressIPX address for the host, in : format. The network numberis a hexadecimal number up to eight digits in length. The node number is the host’s MACaddress. For example, if the assigned network number of “AAAA,” and the host has a MACaddress of 40AA68965439. For this example, you would enter “AAAA:40AA68965439” for thehost IPX address.Note: The ipx ping and the ipx diag commands both test device connectivity (although bothsend back different types of responses). However, due to the variety of vendors andequipment available to networks, one command may work with a particular vendor orfile server, while the other may not. If you are not experiencing success with ipx ping,try ipx diag, and vice versa.ipx rip statsDisplays the IPX RIP statistics. Refer to IPX RIP Statistics, for a list of available statistics andtheir definitions.ipx routeDisplays the current routing table for the system, including static and learned routes.ipx route statsDisplays routing table statistics, including maximum number of routes configured, andnumber of currently-available routes. Refer to IPX Route Statistics.ipx serviceDisplays the current routes to IPX services for the system, including static and learned routes.ipx service statsDisplays the current service table statistics, including the maximum number of services thisrouter is configured to handle, and the number of currently-available services. Refer to IPXService Statistics.ipx sap statsDisplays the IPX SAP statistics. Refer to IPX SAP Statistics, for a list of available statistics andtheir definitions.ipx spoof statsDisplays the IPX spoofing statistics. The IPX spoofing statistics displayed are self-explanatory.